P1 PowerStations

P1 & MotionPanel PowerStations

This section includes specific information about the P1 PowerStation including information about the available disk sets, running capabilities, and additional information.

Disk Sets for the P1& MotionPanel PowerStations

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Model Number	*Rev#	Operating System	**Disks
P1X-XXXXX PMP-XXXXX	100, 101, 102,103, 104a	DOS with Interact and PowerStation Shell	P1 Shell & Drivers (KA-72578-101) - P1shell.zip MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip Interact Project Manager IPM (KA-82228-202) - IPM.zip IPM User Guide (04222-107) - 04222107.PDF
P1X-XXXXX PMP-XXXXX	200 and above	DOS with Interact and MachineShop Shell	MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip PowerStation Start Install Disk (must install this before installing the MachineShop Shell below)(KA-83109-106) KA-83109-106.zip MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip MachineShop Shell Getting Started Guide

Back to the top

P1& MotionPanel PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision Number	P1 Power Station Shell	MachineShop Shell	Floppy	HD Capable	Ethernet Port	Note
100,101,102, 103, 104a	Yes	w/ P1X-2000 upgrade	No	No	NE2000	Can be upgraded to CPF using P1X-2000 adapter
105,200,201	Yes	Yes	No	No	NE2000	Compact Flash (CPF) Ready

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map