P2 Powerstations

P2 PowerStation

This section includes specific information about the P2 PowerStation including information about the available disk sets, running capabilities, and additional information.

Disk Sets for the P2 PowerStation

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Model Number	*Rev#	Operating System	**Disks
P2X-XXXXX	100, 101, 102,103, 104a, 105, 110, 200, 201, 203	DOS with Interact and PowerStation Shell	PowerStation Shell Install Disk (KA-72451-212) - Shell.zip MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip Interact Project Manager IPM (KA-82228-202) - IPM.zip IPM User Guide (04222-107) - 04222107.PD
P2X-XXXXX	100, 101, 102,103, 104a, 105, 110, 200, 201, 203, 204	DOS with Interact and MachineShop Shell	MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip PowerStation Start Install Disk (must install this before installing the MachineShop Shell below)(KA-83109-106) KA-83109-106.zip MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip MachineShop Shell Getting Started Guide

Back to the top

P2 PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision Number	P2 Power Station Shell	MachineShop Shell	Floppy	HD Capable	Ethernet Port	Note
100,101,102, 103, 104a, 105, 110,	Yes	No	No	No	No
200,201, 202, 203	Yes	Yes	No	No	NE2000	Compact Flash (CPF) Ready
204	No	Yes	No	No	18255X	New Pentium Only

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map