P3 Powerstations

P3 PowerStation

This section includes specific information about the P3 PowerStation including information about the available disk sets, running capabilities, and additional information.

Disk Sets for the P3 PowerStation

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Model Number	*Rev#	Operating System	**Disks
P3X-XXX-XX-XXX	206-209	DOS without Interact	PowerStation Utilities Disk (KA-72463-201) - Utils.zip
P3X-XXX-XX-XXX	206-209	DOS with Interact and PowerStation Shell	PowerStation Shell Install Disk (KA-72451-212) - Shell.zip MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip Interact Project Manager IPM (KA-82228-202) - IPM.zip IPM User Guide (04222-107) - 04222107.PD
P3X-XXX-XX-XXX	206-209	DOS with Interact and MachineShop Shell	MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip PowerStation Start Install Disk (must install this before installing the MachineShop Shell below)(KA-83109-106) KA-83109-106.zip MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip MachineShop Shell Getting Started Guide
P3X-XXX-XX-XXX	206-209	Windows 95	PowerStation Utilities Disk (KA-72463-202) - Utils95.zip Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P3X-XXX-XX-XXX	206-209	Windows 95 with Interact and PowerStation Shell	Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip Interact Project Manager IPM (KA-82228-202) - IPM.zip IPM User Guide (04222-107) - 04222107.PDF PowerStation Shell Install Disk (KA-72451-212) - Shell.zip Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P3X-XXX-XX-XXX	206-209	Windows 95 with Interact and MachineShop Shell	Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip PowerStation Start Install Disk (must install this before installing the MachineShop Shell below)(KA-83109-106) KA-83109-106.zip MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip MachineShop Shell Getting Started Guide

Back to the top

P3 PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision Number	P3 Power Station Shell	MachineShop Shell	Floppy	HD Capable	Ethernet Port	Note
100 or 100c, 101 or 101c, 102 or 102c, 103 or 103c, 104 or 104c, 105, 106,107, 108	Yes	No	No	No	No	Keyboard
104a or 104ac	Yes	Yes	No	No	No	Keyboard
200	Yes	No	Yes	Yes	No	N/A
201, 202, 203, 204, 205	Yes	No	Yes	Yes	NE2000	N/A
206, 207, 208, 209	Yes	Yes	Yes	Yes	NE2000	CPF-Ready
210	No	Yes	Yes	Yes	18255X	New Pentium Only

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map