P4 Powerstations

P4 PowerStation

This section includes specific information about the P4 PowerStation including information about the available disk sets, running capabilities, and additional information.


Disk Sets for the P4 PowerStation

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.
Model Number *Rev# Operating System **Disks

P4X-XXX-XX-XXX

206-211

DOS without Interact

PowerStation Utilities Disk (KA-72463-201) - Utils.zip

P4X-XXX-XX-XXX

206-211

DOS with Interact and PowerStation Shell

  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF

P4X-XXX-XX-XXX

206-211

DOS with Interact and MachineShop Shell

  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • PowerStation Start Install Disk (must install this before installing the MachineShop Shell below) (KA-83109-106) KA-83109-106.zip
  • MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip
  • Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip
  • MachineShop Shell Getting Started Guide

P4X-XXX-XX-XXX

206-211

Windows 95

  • PowerStation Utilities Disk (KA-72463-202) - Utils95.zip
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip

P4X-XXX-XX-XXX

206-211

Windows 95 with Interact and PowerStation Shell

  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip

P4X-XXX-XX-XXX

206-211

Windows 95 with Interact and MachineShop Shell

P4X-XXX-XX-XXX

206-211

Windows NT

  • PowerStation Utilities Disk (KA-72463-202) - UtilsNT.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip

P4X-XXX-XX-XXX

206-211

Windows NT with Interact and PowerStation Shell

  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF

P4X-XXX-XX-XXX

206-211

Windows NT with Interact and MachineShop Shell

Back to the top


P4 PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision
Number

P3 Power Station Shell

MachineShop Shell

Floppy

HD Capable

Ethernet Port

Note

100

Yes

No

Yes

Yes

No

N/A

101, 102, 103, 104, 105, 106

Yes No Yes Yes NE2000 Can be upgraded to P31-xxx-xx-xxx

200, 201, 202, 203, 204, 205

Yes No Yes Yes NE2000

N/A

206, 207, 208, 209, 210

Yes

Yes

Yes

Yes

NE2000

CPF-Ready

211

No

Yes

Yes

Yes

18255X

New Pentium Only

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map

© Copyright 2010
Parker Hannifin Corp.
All rights reserved.