P7 PowerStations

P7 PowerStation

This section includes specific information about the P7 PowerStation including information about the available disk sets, running capabilities, and additional information.


Disk Sets for the P7 PowerStation

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.
Model Number *Rev# Operating System **Disks
P7X-XXX-XX-XXX 110 - 115

DOS without Interact

PowerStation Utilities Disk (KA-72463-201) - Utils.zip

P7X-XXX-XX-XXX 110 - 115

DOS with Interact and the PowerStation Shell

  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
P7X-XXX-XX-XXX 110 - 115 DOS with Interact and MachineShop Shell
  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • PowerStation Start Install Disk (must install this before installing the MachineShop Shell below) (KA-83109-106) KA-83109-106.zip
  • MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip
  • Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip
  • MachineShop Shell Getting Started Guide
P7X-XXX-XX-XXX 110 - 115 Windows 95
  • PowerStation Utilities Disk (KA-72463-202) - Utils95.zip
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P7X-XXX-XX-XXX 110 - 115

Windows 95 with Interact and the PowerStation Shell

  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P7X-XXX-XX-XXX 110 - 115 Windows 95 with Interact and MachineShop Shell
P7X-XXX-XX-XXX 110 - 115

Windows NT

  • PowerStation Utilities Disk (KA-72463-202) - UtilsNT.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
P7X-XXX-XX-XXX 110 - 115

Windows NT with Interact and the PowerStation Shell

  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
P7X-XXX-XX-XXX 110 - 115

Windows NT with Interact and MachineShop Shell

Back to the top


P7 PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision
Number

P3 Power Station Shell

MachineShop Shell

Floppy

HD Capable

Ethernet Port

Note

100 -109

Yes

No

Yes

Yes

NE2000

N/A

110 - 115 Yes Yes Yes Yes NE2000 CPF-Ready

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map

© Copyright 2010
Parker Hannifin Corp.
All rights reserved.