Telemecanique
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
| Telemecanique
|
Uni-Telway
TSX SCA 62 via PC Serial Port |
TELM
|
|
Back
to the Top
|
| |
Toshiba
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
| T1
Series |
RS232
Communication Port via PC Serial Port** |
UDI |
|
Back
to the Top
|
| |
Toyopuc
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
| PC1/PC2
Controllers |
RS485
Communication Port via PC Serial Port** |
UDI |
|
Back
to the Top
|
| |
User Device
Interface (UDI) Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
|
UDI
|
Example Development
protocol User Device Interface Run-time (user drivers written
with Interact's Software Developers Kit). User-configurable
to PC Serial Port or I/O Card.
|
UDI
|
|
Back
to the Top
|
| |
Westinghouse
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
| PC-2000 |
NLCP-2524/2525
via PC Serial (RS232) Port |
SIRK
|
| PC-2000 |
Programming
port via PC Serial Port |
SIEMPP |
| Back
to the Top |
|
|
Whedco
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
| Servo
Controller |
RS232
Communication Port via PC Serial Port** |
UDI |
|
Back
to the Top
|
| |
Yaskawa
Drivers
|
|
PLC
|
PLC/PC
|
Interact
Driver
|
|
Yaskawa
|
RS232/422
Communication Port via PC Serial Port
Note:
This Driver will not communicate with Yaskawa MP940 and does
not support Memobus format. Use the MP9 Driver. |
YASK |
| Yaskawa
Memobus |
The
Yaskawa Memobus driver implements the Memobus protocol for communications
with MP9 controllers configured as slave devices. The protocol permits
data exchanges for all supported memory types in point-to-point
serial RS-232C, RS-422, and RS-485 master/slave configurations.
|
MP9 |
|
Back
to the Top
|