P9 Powerstation Shell Flashback TS-PS-P2P7-100 BIOSTSR revision 143 Dynapro SC3 Serial Touchscreen Controller v.2.0.3 Touch_Addr=3E8 Touch_IRQ=11 DOS loaded high in Config.Sys Edit.com and Edit.hlp included -- This is an unsupported Flashback build. CTC-Parker does not endorse running the Powerstation (Workstation) Shell on newer hardware such as the P9 or 6751 Pentium units (P3-P5). Use of this Flashback is at the customer's own risk. -- To load NetBios, remove the REM from the CALL C:\NET\NET.BAT line in the Autoexec.bat OR add the line to an AUTOEXEC.BAT file in the C:\STARTUP directory -- NET directory taken from MachineShop Shell Flashback TOUCH directory taken from PowerStation Shell Install disk -- (c) 2001 CTC Parker Automation Technical Support Engineering