Sample Interact Applications

Sample Interact Applications

1
An example of how to use more than one Local Message Display per Panel.
2
An example application that shows you how to reset a user level when changing panels.
3
An example application that shows you how to reset a user level using a timer.
4
An example application that shows you how to set the time and date without leaving Interact.
5
An example application for Compumotor 6000 series or 6K device(s). CMOT Driver
6
Another example application for Compumotor 6000 series or 6K device(s). CMOT Driver
7
An example application to communicate to Siemens S7-300/400. SHMI Driver
8
Using counter tool to send a bit to the PLC address when press the acknowledge button in the Interact Alarm Screen. DVR river
9

An example application with basic tools using SLC5 driver.

10
An example application with basic tools using TICP driver
11
An example application that shows you animations in Interact. Mostly rotating objects. DVR Driver
12 An example application that shows how to convert decimal to BCD
13 An example application that shows how to display leading zeros on a counter tool
14 Demo application to communicate to a Zeta via RS-232 from a Motionpanel P1 (Note: You must have the Interact 6.03 update to view this file, then restore it from the MachineShop Toolbar)
15

An example application of how to use a single pushbutton and counter tool to set two seperate bits. 04/02/02

Note: In order to restore this project you must have MachineShop 1.02 and Interact 6.04 or higher to view it.

One push.zip

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Support Site Map

Copyright 2010
Parker Hannifin Corp.
All rights reserved.